Don't Forget To Check Your Conections!!!!!

  • This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.


Thrown Stones
May 1, 2012
Funny story. The bike begun to run like crap. She would idle fine, but when given the throttle, would stumble and stutter. I thought maybe because of the recent high humidity, I needed a jetting adjustment. I chased the jetting, moving the needle around, no better. Then when I was inspecting the hot start plunger, I looked at the coil, the positive side connector was lose and arcing. Cleaned it up applied dielectric grease, problem solved. It appeared to act like a fuel issue. Just some information for the brethren! :encouragement: