Front brake issues..........

  • This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

airmobile101

Lifetime Member
Apr 17, 2012
#1
Need some input. My honda has this lovely issue with air getting into the lines(so I think). If I let the bike sit for a week or so and grab the front brake lever, I have zero pressure! I have to pump it u a few times to get pressure. If Im racing, it will come and go. Not a good thing!
I have bleed the brakes millions of times, I zip tied the lever in the closed position with the reservoir open in hopes the air would escape( I left the bike like this for a freaking week!). But yet............. I cant get ride of this shit. I even did the reverse purge, etc......... You think I have a air leak or a component failure?
 

airmobile101

Lifetime Member
Apr 17, 2012
#3
Man, I checked to make sure all the copper crush washers where on, I checked everything and even tightened all the lines. Its driving me crazy!
 

450Riot

Active Member
Apr 24, 2012
#9
Sorry my browser must have needed to be refreshed. Didn't mean to be the 5th guy talking about the same master cyl topic haha.
 

OTMTRX

Active Member
Apr 9, 2012
#14
I think you need the full lot mate.. ..

As it happens I know someone who has a whole front brake set up for you...