Ocp 575

  • This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

OCP

Active Member
Apr 8, 2012
#1
A last minute thrashing left me with no chance to get any good fuel and not much time to spend tuning the bike. The build is a 575 (102x70.8) 14:1, +2 valve head, a pretty big web, kw springs, OCP porting w/ RE valve job, 48 HSR, short Dasa exhaust, and Dyna igntion. A carb and fuel swap should put me over the 80/50 mark. Ill be happy with that. All I had on hand was some VP 110 and six pulls later this is what I got.

As of now, the bike has an override and a +6" EKO arm which is definitely not enough. I plan on building a +10 arm for it soon.
dyno chart pics 005.jpg
 

OCP

Active Member
Apr 8, 2012
#4
Thats the carb for sure Sonny and at some point ill run some mrx and q16. It was pretty retarded to ride with the +6 tho and more power will only make it worse until i can build the +10.